Do you find your camper drains the batteries like they’re going out of style? Do yours get stuck in an exterior socket? If so, you might want to adjust the type of power it’s getting. The answer could be as simple as adding a camping power station to your camper. Sometimes simple solutions can go a long way. Think about how many times your RV has been plugged in for hours at a time; this becomes a pretty big drain on the electrical system. You don’t want to keep doing this, so investing in an RV power station is a great idea. It provides constant power and recharges your battery pack at the same time. Read on to know more about what an RV power station is and how to use one effectively.


What is an RV Power Station?

An RV power station is essentially a battery charger. They’re designed to provide a continuous and rapid charge to an RV battery without being plugged in. This is done through a solar panel and an inverter that converts the energy into DC. The DC is then fed into the RV’s battery pack. Like a typical grid-connected battery charger, an RV power station can be used while camping. They’re especially handy when you’re in a remote location without access to a power plug. The best part is that these products are self-contained. So, you don’t need to constantly monitor their charge level or worry about accidentally draining your battery. When the station is done charging, it will automatically shut off, saving power and increasing efficiency.


How to Use an RV Power Station?

Using an RV power station is pretty straightforward. You simply connect it to your battery and let it do its thing. You can leave it on all the time, or switch it to a “float” mode. In float mode, the charging stops when the battery’s full. You can also manually turn it on or off. When charging a battery, you can either set the charging rate to “constant” or “float”. A constant charge uses a constant current. This means the voltage goes down as the battery charges. A float charge keeps the voltage at around 13.8 volts. This is the same voltage a regular car battery is put at once it’s fully charged. So how long does it take? The charge time varies depending on the battery type and the charging rate. Generally, though, it’s a good idea to charge your batteries at night while they’re not in use. This helps prevent them from being drained while you’re sleeping.


RV Power Stations: FAQs

Now that you know what an RV power station is, let’s take a look at some of the most commonly asked questions about RV power stations. How do I know if I have an RV power station? Many of these devices are designed to look like an extension cord or a power strip. They come with a “power inlet” and a “power outlet.” There’s also a standard 2-prong plug. What does an RV power station do for my RV battery? It charges your battery pack. When you unplug a typical household cord from the socket, it discharges your battery. But when you plug an RV cord into the socket, it recharges the battery. What is the difference between a battery charger and an RV power station? A battery charger is designed to charge one battery at a time. It usually has a single set of inputs, outputs, and power control settings. A battery charger usually takes longer to charge a battery because it has to regulate the voltage to a specific level. A battery charger is more expensive than an RV power station because it’s designed to charge one battery at a time.



An RV power station is a vital addition for any camper. It helps prevent your batteries from being drained while you’re not using it and it also provides constant power. You can find RV power stations at most RV retailers, or you can buy online. They’re small and lightweight, so you can easily store one in your camper’s battery compartment. They’re also easy to use and maintain. Once you have an RV power station installed, you’ll wonder how you ever did without it.